Extracting Water from Fog

Most of us take it for granted that water is as close as your kitchen tap. But that’s not true everywhere. Two scientists at MIT have a new method for harvesting water from fog, especially fog released from cooling towers such as those found from power plants. It turns out, harvesting water from fog isn’t a new idea. You typically insert a mesh into the air and collect water droplets from the fog. The problem is with a typical diameter of 10 microns, the water droplets mostly miss the mesh, meaning they typically extract no more than 2% of the water content in the air.

The team found two reasons for the low efficiency. Water clogs the mesh openings which can be somewhat mitigated by using coated meshes that shed water quickly. Even in the lab that only increases the yield to about 10%. The bigger problem, though, is basically only some of the droplets hit the mesh, and even those that do may not stick because of drag. Fine meshes can help but are harder to make and have low structural integrity. Their solution? Inject ions into the fog to charge the water droplets and impart the opposite charge on the mesh.

This seems simple enough and the testing proves it out. Oddly enough, when using the technique, finer meshes do not necessarily translate into higher collection rates due to aerodynamics. Although the test setups were relatively small, the energy consumption scaled up appears to be about 2 kWh per cubic meter which is less than other water recovery methods like desalination. Using a concentrated fog source such as that created by a cooling tower could drop that down by a factor of 10, which is much less than conventional water source energy usage.

We love to see people take their knowledge of bending electrons to their will and use it to improve conditions for mankind. If only there were a prize for that. Of course, it is possible to pull water out of thin air. Electronics can also play a part in cleaning up water you already have.

from Blog – Hackaday https://ift.tt/2sXpOSL

Thoughts or comments?